N. Inoue/N. Kaneko/, Limit Analysis of Polymer Forming, Proc. 1st ICTP (1984) 1-6, Japan.

M. Hakamada/T. Nakayama/N. Inoue/, Hydrostatic Extrusion of HDPE Using Metallic and Polymeric Dies, Proc. 1st ICTP (1984) 7-12, Japan.

T. Hirai/, Flow of Fibre-Reinforced Composite Materials during Press Moulding, Proc. 1st ICTP (1984) 13-18, Japan.

T. Okai/T. Machida/, Improvement of Mechanical Properties of Thermoplastic Sheets by New Rolling Method, Proc. 1st ICTP (1984) 19-26, Japan.

G.W. Rowe/, Problems Involved in the Numerical Analysis of Plastic Working Processes for New Materials, Proc. 1st ICTP (1984) 27-38, UK.

G. Schroeder/H. Rydstad/R.F. Singer/M. Nazmy/, Forging and Thermomechanical Treatment of ODS-Nickel-Base Alloys, Proc. 1st ICTP (1984) 39-44, Switzerland.

S.D. El Wakil/, A Model Study of Metal Forming in the Mushy State, Proc. 1st ICTP (1984) 45-49, USA.

M.A. Taha/N.A El-Mahallawy/, Extrusion Behaviour of Semi-Solid Alloys and its Improvement by Rheocasting, Proc. 1st ICTP (1984) 50-54, Egypt.

Y. Naganuma/K. Abe/, Tandem Multi Drawing of Seam-Welded Metallic Tube Containing Optical Fiber, Proc. 1st ICTP (1984) 55-59, Japan.

Z.R. Wang/B.C. Zhu/L.J. Liu/, An Experimental Study of Superplastic Deformation under Combined Stresses, Proc. 1st ICTP (1984) 60-65, China.

A. Hasegawa/T. Matsushita/Y. Moriguchi/, Superplasticity in alpha-beta Titanium Alloys and Deformation in Hot Die Forging, Proc. 1st ICTP (1984) 66-71, Japan.

M. Ohmori/M. Itoh/F. Yoshida/M. Inoue/, Apparatus for Testing Materials under High Hydrostatic Pressure and High Deformation Speed and Some Experimental Results of Zinc, Proc. 1st ICTP (1984) 72-77, Japan.

Y. Kaieda/A. Oguchi/, Brittle to Ductile Transition of an Al-Cu Eutectic Alloy and a Hypo-Eutectic White Cast Iron under High Hydrostatic Pressure and Elevated Temperature, Proc. 1st ICTP (1984) 78-83, Japan.

E.G. Thomsen/A.H. Shabaik/, Dynamic Recovery during Deformation of a Medium Carbon Steel, Proc. 1st ICTP (1984) 84-89, USA.

O.T. Bruhns/, On Constitutive Modeling of the Inelastic Behaviour of Austenitic Steel, Proc. 1st ICTP (1984) 90-95, W.-Germany.

K. Ikeda/H. Igaki/M. Haraoka/, Fracture Mechanism of Ferritic Nodular Cast Iron under Hydrostatic Pressure, Proc. 1st ICTP (1984) 96-101, Japan.

J. Kihara/ K. Nakamura/ K. Dohya/S. Sukumoda/, Surface Roughness Change and Wear of Roll in Hot and Cold Rolling of Steel, Proc. 1st ICTP (1984) 102-109, Japan.

A. Ohnuki/K. Hasuka/K. Nakajima/T. Kawanami/, Wear and Surface Breakdown of Work Rolls for Hot Rolling, Proc. 1st ICTP (1984) 110-115, Japan.

L. Zhao/X. Lin/, A Study of Limit Effect of Technological Lubrication in Hot Rolling, Proc. 1st ICTP (1984) 116-120, China.

T. Abildgaard/, Prediction of the Force Components Acting on a Ploughing Cone by Means of Three-Dimensional Upper Bound Theory, Proc. 1st ICTP (1984) 121-126, Denmark.

J.M. Challen/P.L.B. Oxley/, Some New Thoughts on the Mechanisms of Sliding and Sticking Friction in Metal Working Processes, Proc. 1st ICTP (1984) 127-132, Australia.

L.F. Ciupik/, Mechanisms of Cold Deformation Bonding of Metals during their Simultaneous Plastic Flow, Proc. 1st ICTP (1984) 133-138, Poland.

T. Tabata/S. Masaki/, Cold Pressure Seam Welding by Penetration of Rotating Tool, Proc. 1st ICTP (1984) 139-144, Japan.

N. Kawai/K. Dohda/, Tribology in Metal Forming Processes, Proc. 1st ICTP (1984) 145-156, Japan.

M. Gierzynska-Dolna/E. Bociaga/, Tribological Attempt to Estimation of Seizing Ability of Metal Sheets, Proc. 1st ICTP (1984) 157-161, Poland.

Y. Goto/S. Wakasugi/T. Furukawa/, A Study of Material Pick-up to Tool Surface in Metal Forming, Proc. 1st ICTP (1984) 162-167, Japan.

K. Osakada/F. Murayama/, A Method for Evaluating Tool Materials against Seizure in Metal Forming, Proc. 1st ICTP (1984) 168-173, Japan.

T. Sakai/H. Sasaki/Y. Saito/K. Kato/, Effect of Work Hardening Property on Pick-up Behavior of Aluminum and its Alloys, Proc. 1st ICTP (1984) 174-179, Japan.

H. Ike/, Fundamental Mechanisms of Galling and Other Surface Damage Caused by Sliding and/or Plastic Deformation, Proc. 1st ICTP (1984) 180-185, Japan.

J.H. Dautzenberg/J.A.G. Kals/, Stress State and Surface Roughness, Proc. 1st ICTP (1984) 186-191, Netherlands.

K.C. Tripathi/, Tribological Approach to Materials Processing, Proc. 1st ICTP (1984) 192-199, USA.

B. Avitzur/C.J. Van Tyen/Z.J. Luo/C.R. Tang/, A Model for the Simulation of Friction between Dies and Workpiece, Proc. 1st ICTP (1984) 200-207, USA.

W. Dobrucki/P. Sobkowiak/, Mutual Relation of Metal Plastic Flow and Friction Phenomena on the Surface of Contact of the Metal with Tools, Proc. 1st ICTP (1984) 208-213, Poland.

E. Doege/R. Schneider/, Wear; Friction and Lubricants in Hot Forging, Proc. 1st ICTP (1984) 214-218, W.-Germany.

H. Saiki/H. Nishitake/Y. Yoshioka/T. Kumagai/, Study on the Frictional Boundary Condition at the Edge of Tool-Material Interface in Massive Forming, Proc. 1st ICTP (1984) 219-224, Japan.

T. Arai/Y. Tsuchiya/, Evaluation of Wear and Galling Resistance of Surface Treated Die Steels, Proc. 1st ICTP (1984) 225-230, Japan.

E. Felder/J.-F. Renaudin/Y. Thore/, The Tribology of a Simple Hot Forging Process : Influence of Lubrication and Nitriding Treatment, Proc. 1st ICTP (1984) 231-234, France.

S. Masaki/T. Tabata/, A Method for Evaluating Liquid Lubricants Using Piezoelectric Sensor, Proc. 1st ICTP (1984) 235-240, Japan.

A. Azushima/Y. Kita/, Fundamental Tribology in Cold Sheet Rolling - Development of Methods for Evaluating the Lubricity of Lubricant-, Proc. 1st ICTP (1984) 241-246, Japan.

K. Matsui/T. Matsushita/K. Takatsuka/Y. Yamaguchi/, Evaluation of Lubricants for Rolling of Aluminum Sheet and Foil, Proc. 1st ICTP (1984) 247-252, Japan.

S. Shima/Y. Tozaki/Y. Yamamoto/M. Oyane/, Temperature Rise in Lubricant in Inlet Zone in Wire-Drawing, Proc. 1st ICTP (1984) 253-258, Japan.

N. Bay/, Tool/Workpiece Interface Stresses in Cold Forward Extrusion, Proc. 1st ICTP (1984) 259-266, Denmark.

T. Nakamura/A. Urata/K. Kato/, Investigation into Seizure Mechanism by Means of Extrusion-Type Friction Testing Machine, Proc. 1st ICTP (1984) 267-272, Japan.

K. Yoshikawa/T. Sato/, Evaluation of Adhesion at Sliding and Rolling Contact Surface in Simulation of Metal Forming, Proc. 1st ICTP (1984) 273-278, Japan.

K. Manabe/S. Mori/K. Suzuki/H. Nishimura/, Bulge Forming of Thin Walled Tubes by Micro-Computer Controlled Hydraulic Press, Proc. 1st ICTP (1984) 279-284, Japan.

J. Endow/T. Murota/, On the Flattening of Cross-Section of Circular Tubes in Uniform Bending, Proc. 1st ICTP (1984) 285-290, Japan.

W. Thompson/K. Denmeade/, Computer Simulation of Cold Forming of Tubes, Proc. 1st ICTP (1984) 291-296, Australia.

S. Fuchizawa/, Influence of Strain-Hardening Exponent on the Deformation of Thin-Walled Tube of Finite Length Subjected to Hydrostatic Internal Pressure, Proc. 1st ICTP (1984) 297-302, Japan.

A. Zghal/A. Shindo/Y. Tomita/, Instability Phenomena in the Pure Bending of Shape Steels, Proc. 1st ICTP (1984) 303-308, Japan.

H. Ogawa/K. Tamura/T. Nakagawa/, A Successive U-O Bending for Manufacturing Long Length Circular Tube, Proc. 1st ICTP (1984) 309-314, Japan.

Y.X. He/X.P. Liu/, Study on the Mechanical and Deformational Bahaviour of Rolled-Piece by the Experimental Mechanics Method (Report 1 of Study on Stress and Strain; Force and Deformation in Flat Rolling), Proc. 1st ICTP (1984) 315-320, China.

P.S. Theocaris/A.G. Mamalis/C.A. Stassinakis/, On the Pressure Distribution and the Friction Coefficient Between Stock and Rolls in Ingot Hot-Rolling, Proc. 1st ICTP (1984) 321-326, Greece.

N. Fujimori/, Microcomputer-Aided Analytic Method for VTR Images of Two Dimensional Plastic Deformation, Proc. 1st ICTP (1984) 327-332, Japan.

T. Sawada/, Measurement of Dihedral Angle of a Plate in Bending with an Image Sensing Camera, Proc. 1st ICTP (1984) 333-338, Japan.

C. Tsumuki/K. Imahashi/I. Nagare/, Application of Powder Forging to Automotive Parts, Proc. 1st ICTP (1984) 339-346, Japan.

K. Yamaguchi/K. Nosoh/N. Takakura/M. Fukuda/, Production of Deep Cylindrical and Square Cups by Ironing of Sintered Metal Powder Preforms, Proc. 1st ICTP (1984) 347-352, Japan.

A.K. Jha/S. Kumar/, Forging of a Hollow Metal Powder Preform Disc, Proc. 1st ICTP (1984) 353-360, India.

F. Yoshida/M. Ohmori/M. Sawa/, Effect of Hydrostatic Pressure on the Deformation of Sintered Metals, Proc. 1st ICTP (1984) 361-366, Japan.

H. Suzuki/Y. Yokouchi/M. Murata/H. Negishi/, Finite Element Analysis of Tube Deformation under Impulsive Internal Pressure, Proc. 1st ICTP (1984) 367-372, Japan.

T. Sano/M. Takahashi/Y. Murakoshi/K. Matsuno/, Impulsive Forming of Tube Ends by Electromagnetic Force, Proc. 1st ICTP (1984) 373-378, Japan.

A. Neubauer/H. Steinicke/K. Vinzens/H. Schmicker/, New Processes for Explosive Metal Forming of Sheet Parts in Batch Production, Proc. 1st ICTP (1984) 379-384, E.-Germany.

T. Behera/S. Misra/, Forming Limit Criteria and Formability of Aluminium Sheet in Explosive Forming, Proc. 1st ICTP (1984) 385-390, India.

M. Hayama/K. Kawai/, An Approach to the Theoretical Analysis in Rotary Forming Process of Cylindrical Rods, Proc. 1st ICTP (1984) 391-400, Japan.

B.K. Agarwala/, The Shear Spinning Technology of Tubes with High Dimensional Precision, Proc. 1st ICTP (1984) 401-409, India.

P.R. de Francisco/A.M. Sanchez Perez/, Shear Spinning Modeling, Proc. 1st ICTP (1984) 410-415, Spain.

H. Furukawa/I. Kasamatsu/I. Hirata/, Forming of Corrugated Diaphragms by Rolling Steel Balls, Proc. 1st ICTP (1984) 416-421, Japan.

D. Bhattacharyya/P.D. Smith/, The Development of Longitudinal Strain in Cold Roll Forming and its Influence on Product Straightness, Proc. 1st ICTP (1984) 422-427, New Zealand.

Y. Mihara/K. Suzuki/I. Yamanobe/, Roll Forming of U-Shaped Ribs by a New Roller Die Forming Process, Proc. 1st ICTP (1984) 428-433, Japan.

K. Lange/, Flexible Manufacturing Systems for Plastic Working, Proc. 1st ICTP (1984) 434-445, W.-Germany.

M. Iwamatsu/, F.M.S. in Metal Stamping, Proc. 1st ICTP (1984) 446-448, Japan.

C. Soda/T. Sano/K. Matsuno/, Metal Forming Machinery Developed in the National Project of FMSC, Proc. 1st ICTP (1984) 449-460, Japan.

P.0. Strandell/, Flexible Rolling of Bar and Rod in Small Order Lots, Proc. 1st ICTP (1984) 461-465, Sweden.

Y. Semenov/S. Scorodumov/M. Kryuchkov/, Transfer Lines for Multistep Sheet-Metal Stamping with Industrial Robots, Proc. 1st ICTP (1984) 466-470, USSR.

J. Triouleyre/, Contribution to Automatic Selection of Processes - Application to Axisymmetric Formed Parts, Proc. 1st ICTP (1984) 471-476, France.

Y. Taura/H. Yoshimura/J. Shimazaki/, Precise Forming with a Multi-Action Press, Proc. 1st ICTP (1984) 477-482, Japan.

Y. Iwasaki/H. Shiota/Y. Taura/, Forming of the Three-Dimensional Surface with a Triple-Row-Press, Proc. 1st ICTP (1984) 483-488, Japan.

R. Kopp/G. Arfmann/, The Application of CAD/CAE/CAM from the Viewpoint of Plastic Working Technology, Proc. 1st ICTP (1984) 489-497, W.-Germany.

J. Triouleyre/, CAD-CAM and Spinning, Proc. 1st ICTP (1984) 498-502, France.

H. Kozono/, Integrated CAD/CAM System for Rolls; Tools and Steel Products, Proc. 1st ICTP (1984) 503-507, Japan.

H. Ona/T. Jimma/H. Kozono/, A Computer Aided Design System for Cold Roll Forming, Proc. 1st ICTP (1984) 508-513, Japan.

W.Y.D. Yuen/C.H. Ellen/, New Developments in CAD for Roll Forming, Proc. 1st ICTP (1984) 514-519, Australia.

M. Kunieda/T. Nakagawa/, Manufacturing of Laminated Deep Drawing Dies by Laser Beam Cutting, Proc. 1st ICTP (1984) 520-525, Japan.

J. Xiao/X. Xiao/T. Yan/D. Li/Z. Li/F. Jiang/, Computer Aided Design and Manufacture of Fine-Blanking Tool, Proc. 1st ICTP (1984) 526-530, China.

T. Altan/S.I. Oh/, CAD/CAM of Tooling and Process for Plastic Working, Proc. 1st ICTP (1984) 531-544, USA.

R. Gotoh/M. Nishimura/M. Nishiguchi/, Application of CAD System to Hot Forging, Proc. 1st ICTP (1984) 545-550, Japan.

T.P. Davison/W.A. Knight/, Computer Aided Process Design for Cold Forging Operations, Proc. 1st ICTP (1984) 551-556, UK.

R.S. Lee/, Computer Aided Design of Extrusion Tooling, Proc. 1st ICTP (1984) 557-562, China.

F.H. Osman/A.N. Bramley/M.I. Ghobrial/, Forging and Preform Design Using UBET, Proc. 1st ICTP (1984) 563-568, UK.

L. Cser/G. Ziaja/, Use of Elemental Upper Bound Technique in CAD, Proc. 1st ICTP (1984) 569-573, Hungary.

N.L. Dung/O. Mahrenholtz/, Numerical Method for Plastic Working Processes and Die Design, Proc. 1st ICTP (1984) 574-580, W.-Germany.

K. Hanaki/K. Kato/, Pressure Peak in Bending and Unbending Process, Proc. 1st ICTP (1984) 581-586, Japan.

N.E. Thompson/, New Results in the Theory of Tension Levelling, Proc. 1st ICTP (1984) 587-592, Australia.

O. Andreen/P. Crafoord/, Calculation of Springback of Sheet Metal Bends, Proc. 1st ICTP (1984) 593-598, Sweden.

T.X. Yu/W. Stronge/W. Johnson/, Stamping and Springback of Plate between Cylindrical Dies, Proc. 1st ICTP (1984) 599-604, UK.

M. Sugimoto/N. Kawashima/K. Uenishi/, Plane Stress Analysis of the Cantilever as a Contact Problem, Proc. 1st ICTP (1984) 605-610, Japan.

A. Fatnassi/Y. Tomita/A. Shindo/, Theoretical Investigation of Buckling Behaviour of Axisymmetric Elastic-Plastic Membrane Shells Subjected to Axisymmetric Forming, Proc. 1st ICTP (1984) 611-616, Japan.

S. Dzidowski/, The Effect of Strain Hardening Factor on Limiting Displacements during Transverse Shearing, Proc. 1st ICTP (1984) 617-622, Poland.

K. Miyauchi/, Bauschinger Effect in Planar Shear Deformation of Sheet Metals, Proc. 1st ICTP (1984) 623-628, Japan.

U.S. Rao/P.C. Chaturvedi/, Sheet Metal Forming Limits under Complex Strain Paths Using Shear Instability Criterion, Proc. 1st ICTP (1984) 629-634, India.

A. Melander/E. Schedin/, On the Forming Limit in Sheet Metal Forming, Proc. 1st ICTP (1984) 635-639, Sweden.

H. Ohsawa/S. Yamazaki/H . Nishimura/, Strain Hardening and Strain Rate Sensitivity in Uniaxial Tension and Hemispherical Punch Stretching, Proc. 1st ICTP (1984) 640-645, Japan.

Jiang Kuihua/, Limit Strains in Sheet Metal Stretching when the Principal Axis of Stress Does Not Coincide with the Anisotropic Axis, Proc. 1st ICTP (1984) 646-650, China.

H. Balmori Ramirez/V. Lopez Hirata/Y. Mitani/, Metallurgical Factors Affecting the Formability of Rolled Zinc Polycrystal Sheets, Proc. 1st ICTP (1984) 651-653, Mexico.

M.L. Wenner/, A Numerical Analysis of Experimental Errors in the Hydrostatic Bulging Test, Proc. 1st ICTP (1984) 654-659, USA.

K. Chung/D. Lee/, Computer-Aided Analysis of Sheet Material Forming Processes, Proc. 1st ICTP (1984) 660-665, USA.

E. Nakamachi/R. Sowerby/, A Numerical Analysis of Bulging and Punch Stretching of Circular Disks Based on Kirchhoff Plate Theory, Proc. 1st ICTP (1984) 666-671, Japan.

A. Makinouchi/, Elastic-Plastic Stress Analysis of U-Bend Process of Sheet Metal, Proc. 1st ICTP (1984) 672-677, Japan.

H. Iseki/T. Murota/, Analysis of Deep Drawing of Non-axisymmetric Cup by the Finite Element Method, Proc. 1st ICTP (1984) 678-684, Japan.

Z. Marciniak/, Assessment of Material Formability, Proc. 1st ICTP (1984) 685-694, Poland.

M. Gotoh/, A New Plastic Constitutive Equation and its Applications to Forming Limit Problems of Metal Sheets, Proc. 1st ICTP (1984) 695-700, Japan.

A. Mohammed-Ali/P.B. Mellor/, Constitutive Relations and Forming Limit Criteria, Proc. 1st ICTP (1984) 701-706, UK.

R.H. Wagoner/, Development of Constitutive Equations for Sheet Forming Analysis, Proc. 1st ICTP (1984) 707-711, USA.

G.D. Lahoti/V. Nagpal/T. Altan/, Prediction of Limit Strains in Biaxial Stretching of Sheets Using Marciniak's Approach, Proc. 1st ICTP (1984) 712-718, USA.

P.F. Thomason/, A Theoretical Approach to the Development of Forming Limit Criteria in Plastic-Working Processes, Proc. 1st ICTP (1984) 719-722, UK.

J. Gronostajski/, Use of New Yield Criteria in Determining the Effect of Strain Path on Forming Limit Diagrams, Proc. 1st ICTP (1984) 723-728, Poland.

K. Yoshida/, Trends in Forming Technology for Car Body in Japan, Proc. 1st ICTP (1984) 729-734, Japan.

Y. Hayashi/M. Takagi/, Control of Side Wall Curl in Draw-Bending of High Strength Steel Sheets, Proc. 1st ICTP (1984) 735-740, Japan.

J.M. Jalinier/A. Barata da Rocha/F. Barlat/L. Chakari/G. Rio/, Modelling of Sheet Metal Forming, Proc. 1st ICTP (1984) 741-746, France.

K. Yoshida/H. Hayashi/M. Usuda/T. Amaike/H. Komorida/, Effects of Material Properties on Surface Deflection Behavior due to Elastic Recovery in Press Forming, Proc. 1st ICTP (1984) 747-752, Japan.

D.W. Kim/N.S. Kim/, A Study on the Stretch Forming, Proc. 1st ICTP (1984) 753-758, Korea.

Y. Kurosaki/I. Fujishiro/, A Sheet Metal Forming Process Employing the Viscoplastic Substance as a Pressure-Carrying Medium, Proc. 1st ICTP (1984) 759-764, Japan.

S. Kohara/M. Katsuta/K. Aoki/K. Suzuki/, Forming Limit Curves for Aluminum; Copper and Their Alloys, Proc. 1st ICTP (1984) 765-768, Japan.

K. Suzuki/T. Nakagawa/, Counter Pressure Drawing by Using Single Action Press, Proc. 1st ICTP (1984) 769-774, Japan.

K. Nakamura/T. Nakagawa/, Hydraulic Counter-Pressure Deep Drawing Assisted by Radial Pressure, Proc. 1st ICTP (1984) 775-780, Japan.

T.H.C. Childs/M.H. Walters/, Strip Peeling of Carbon and Stainless Steels, Proc. 1st ICTP (1984) 781-786, UK.

I.I. Novikov/K.M. Klimov/, Electrostimulating Plasticity of Metals, Proc. 1st ICTP (1984) 787-792, USSR.

R. Moszumanski/Z. Polanski/, A New Technology of Pulsatory Forming and the Technological Tool to Carry it Out, Proc. 1st ICTP (1984) 793-798, Poland.

N. Atanasiu/, Metal Forming in the Ultrasonic Field, Proc. 1st ICTP (1984) 799-804, Romania.

M. Murakawa/, Burr-free Shearing, Proc. 1st ICTP (1984) 805-814, Japan.

B. Bosch/F. Birzer/K. Hayashi/, Material Consumption in Fine-Blanking, Proc. 1st ICTP (1984) 815-820, Switzerland.

H. Yokoi/T. Nakagawa/, Precision Shearing of Plastic Polymer Sheets with Poor Punchability by Vibro-Punching, Proc. 1st ICTP (1984) 821-826, Japan.

I. Aoki/T. Nakagawa/, Blanking of Amorphous Alloy, Proc. 1st ICTP (1984) 827-832, Japan.

K. Takaishi/T. Kondo/S. Sugiyama/M. Mizutame/, Statistical Analysis of Blanking Tool Wear by a Group Method of Data Handling, Proc. 1st ICTP (1984) 833-838, Japan.

K. Pohlandt/S.N. Rasmussen/, Improving the Accuracy of the Upsetting Test for Determining Stress-Strain Curves, Proc. 1st ICTP (1984) 839-844, W.-Germany.

J. Havranek/, The Effect of Pre-Drawing on Strength and Ductility in Cold Forging, Proc. 1st ICTP (1984) 845-850, Australia.

H. Sekiguchi/K. Osakada/, Criterion of Ductile Fracture of Carbon Steel for Predicting Cold Forging Limit, Proc. 1st ICTP (1984) 851-856, Japan.

P. Bariani/, Cold Workability Limits of 1100 Aluminium; 2024 and 7075 Aluminium Alloys in Isothermal and Adiabatic Upsetting Tests, Proc. 1st ICTP (1984) 857-865, Italy.

M. Shimura/S. Saito/, Failure Maps (Negative Pressure-Strain-Temperature Diagrams) and Its Application to Bulk Deformation Processes, Proc. 1st ICTP (1984) 866-871, Japan.

K. Kobatake/H. Sekiguchi/K. Osakada/, Warm Temper Forging - A New Thermomechanical Treatment, Proc. 1st ICTP (1984) 872-877, Japan.

K. Kondo/, Developments of New Precision Cold Die Forging Processes, Proc. 1st ICTP (1984) 878-887, Japan.

O.P. Grover/B.L. Juneja/, Analysis of Closed-Die Forging of Gear-Like Elements, Proc. 1st ICTP (1984) 888-893, India.

W. Takahasi/T. Fukuda/H. Hagita/S. Sunouchi/K. Igaki/, Warm Forging of Automobile Small Gears, Proc. 1st ICTP (1984) 894-899, Japan.

M. Plancak/V. Vujovic/, Radial Stress Distribution on the Container Wall in Cold Backward Extrusion of Steel, Proc. 1st ICTP (1984) 900-905, Yugoslavia.

X.Y. Ruan/S.L. Li/S.Z. Zhang/G.W. Li/, The Research on the Deformation Force of Combined Extrusion, Proc. 1st ICTP (1984) 906-911, China.

J.B. Hawkyard/T. Hirai/T. Ishise/T. Katayama/, Optimisation of Shrink Ring Interference Configuration for Metal Forming Die, Proc. 1st ICTP (1984) 912-917, UK.

M. Jarl/, Upsetting of Continuous Cast Steel for Closed-Die Forging, Proc. 1st ICTP (1984) 918-923, Sweden.

C. Tuncer/T.A. Dean/, Precision Forging Hollow Cylinders, Proc. 1st ICTP (1984) 924-929, UK.

Y. Maekawa/T. Hirai/T. Katayama/J.B. Hawkyard/, Modelling and Numerical Analysis of Cross Rolling and Profile Ring Rolling Processes, Proc. 1st ICTP (1984) 930-935, Japan.

H. Tsukamoto/K. Morimoto/T. Juge/K. Takahashi/, Application Study on Cross Roll Method for Axi-Symmetrical Stepped Shaft, Proc. 1st ICTP (1984) 936-941, Japan.

P.M. Standring/, Rotary Forging - A New Approach, Proc. 1st ICTP (1984) 942-947, UK.

B. Avitzur/, Analysis of Flow Through Conical Converging Dies - Update l984, Proc. 1st ICTP (1984) 948-960, USA.

S.H. Talbert/, Mechanics of Plastic Flow in Metal Forming: General Solutions for a Class of Ductile Materials, Proc. 1st ICTP (1984) 961-966, Canada.

M. Kiuchi/A. Karato/, Application of UBET to Non-Axisymmetric Forging, Proc. 1st ICTP (1984) 967-972, Japan.

N.R. Chitkara/U. Patel/, Plastic Flow in Deep Indentation during Open-Piercing of Thick Circular Blocks of Aluminium by Rigid Mandrel and Ring-Type Piercers, Proc. 1st ICTP (1984) 973-979, UK.

B. Cheng/, Forging and Stamping in China, Proc. 1st ICTP (1984) 980-983, China.

T. Wanheim/V. Maegaard/J. Danckert/, The Physical Modelling of Plastic Working Processes, Proc. 1st ICTP (1984) 984-996, Denmark.

S. Ono/M. Tanaka/H. Tsukada/T. Iwadate/, Analysis on Distribution of Deformation during Hot Forging, Proc. 1st ICTP (1984) 997-1002, Japan.

H. Tsukamoto/Y. Taura/J. Ibushi/, Simulation of Hot Steel in Plastic Working with Plasticine and Lead, Proc. 1st ICTP (1984) 1003-1008, Japan.

K. Mori/K. Osakada/K. Nakadoi/M. Fukuda/, Simulation of Three-Dimensional Deformation in Metal Forming by the Rigid-Plastic Finite Element Method, Proc. 1st ICTP (1984) 1009-1014, Japan.

T. Tatenami/, F.E.M. for Rigid Plastic Materiel Using Dependent Nodal Point Displacement with Consideration of Frictional Force, Proc. 1st ICTP (1984) 1015-1020, Japan.

K. Sato/S. Tanaka/F. Uchida/, Numerical Simulation System for Plastic Metal Forming Process Based on a FEM Introducing Slide between Elements, Proc. 1st ICTP (1984) 1021-1026, Japan.

J.X. Sun/S. Kobayashi/, Analysis of Block Compression with Simplified Three-Dimensional Elements, Proc. 1st ICTP (1984) 1027-1034, China.

S. Kobayashi/, The Role of the Finite Element Method in Metal Forming Technology, Proc. 1st ICTP (1984) 1035-1040, USA.

O.C. Zienkiewicz/S. Nakazawa/J.P. Vilotte/, Finite Elements in Forming Processes, Proc. 1st ICTP (1984) 1041-1050, UK.

S.I. Oh/J.P. Tang/A. Badawy/, Finite Element Mesh Rezoning and its Applications to Metal Forming Analysis, Proc. 1st ICTP (1984) 1051-1058, USA.

J. Kihara/K. Ishii/, Application of Boundary Element Method for Elasto/Viscoplastic Problems, Proc. 1st ICTP (1984) 1059-1064, Japan.

E. Chu/R. Sowerby/, Some Aspects of Finite Deformation, Proc. 1st ICTP (1984) 1065-1069, Canada.

B.A. Drujanov/, On Ruptures of Velocities in Thermoplastic Bodies, Proc. 1st ICTP (1984) 1070-1073, USSR.

I.F. Collins/, Slipline Field Analysis of Forming Processes in Plane-Strain and Axial Symmetry, Proc. 1st ICTP (1984) 1074-1084, New Zealand.

P. Dewhurst/, The Coulomb Friction Boundary Value Problem in Plane-Strain Slip-Line Field Theory, Proc. 1st ICTP (1984) 1085-1090, USA.

T. Jimma/T. Kuwabara/S.C. Choi/, Researches on the Deep Drawing of Reentrant Contour Shells, Proc. 1st ICTP (1984) 1091-1096, Japan.

S.P. Yakovlev/, Sheet-Materials Anisotropy and its Effect on the Drawing, Proc. 1st ICTP (1984) 1097-1100, USSR.

R.I. Nepershin/, Plane Plastic Flow Problems with Kinematic Boundary Conditions, Proc. 1st ICTP (1984) 1101-1105, USSR.

P. Courtois/J.C. Gelin/J. Oudin/Y. Ravalard/, Linear Optimisation of Plane Plastic Flows, Proc. 1st ICTP (1984) 1106-1110, France.

L. Wu/Y. Zhao/, On-Line Yield Stress Model for Tandem Cold Mill, Proc. 1st ICTP (1984) 1111-1115, China.

B.V. Kiefer/, Three-Dimensional Finite Element Prediction of Material Flow and Strain Distributions in Rolled Rectangular Billets, Proc. 1st ICTP (1984) 1116-1125, USA.

I. Yarita/L. Mallett/E.H. Lee/, Stress and Deformation Analysis of Metal Rolling Process, Proc. 1st ICTP (1984) 1126-1131, Japan.

T. Hirakawa/F. Fujita/M. Kamata/Y. Yamada/, Analysis of Strip Rolling by the Finite Element Method, Proc. 1st ICTP (1984) 1132-1137, Japan.

R. Roychouduri/J.G. Lenard/, A Mathematical Model of Cold Rolling - Experimental Substantiation, Proc. 1st ICTP (1984) 1138-1145, India.

O. Pawelski/W. Rasp/H. Teutsch/, A Combined Analytical and Numerical Model for Calculating Load and Thickness Profile in Width Direction of a Cold-Rolled Strip, Proc. 1st ICTP (1984) 1146-1150, W.-Germany.

Y. Tozawa/, Analysis for Three-Dimensional Deformation in Strip Rolling Taken Deformation of Rolls into Consideration, Proc. 1st ICTP (1984) 1151-1160, Japan.

T. Ishikawa/Y. Tozawa/N. Yukawa/M. Yamanaka/, Analytical Approach to the Shape of Rolled Strip, Proc. 1st ICTP (1984) 1161-1166, Japan.

M. Nakamura/S. Maki/F. Yamada/N. Nagai/, An Experimental Study on Shape Characteristics of the Rolled Strip in the Differential Speed Rolling Process, Proc. 1st ICTP (1984) 1167-1172, Japan.

Zhu Quan/, Deformation Characteristics of the Cross Shear Cold Rolling (CSCR) of Ultra Thin Strip and the Theory of the 'Elastic Plug', Proc. 1st ICTP (1984) 1173-1178, China.

O. Pawelski/M. Okado/, Analysis of Instationary Deformation at Head End of Slab during Edge Rolling, Proc. 1st ICTP (1984) 1179-1183, W.-Germany.

M. Lay/Y. Chang/S. Xu/Z. Duan/, The Investigating of the Principle of the Axial and Radial Adjustment in Sendzimir Mills, Proc. 1st ICTP (1984) 1184-1189, China.

Y. Saito/Y. Kusumoto/T. Hattori/K. Kato/, Deformation Analysis in Shape Rolling Using an Upper Bound Method, Proc. 1st ICTP (1984) 1190-1199, Japan.

T. Shibahara/R. Takahashi/ T. Nunokawa/S. Kubota/, Automatic Width Control System at Roughing Train Hot Strip Mill, Proc. 1st ICTP (1984) 1200-1205, Japan.

J.L. Chenot/V. Girardot/B. Fazan/Z. Smarzynski/, A Numerical Model for the Prediction of the Geometric Shape of the Ends of Plates during Hot Rolling, Proc. 1st ICTP (1984) 1206-1211, France.

Y. Noguchi/K. Aoyagi/T. Kawanami/M. Ataka/K. Nakajima/, Simulation of Wire Rolling in the Steady State; Transient State and Influence Coefficient, Proc. 1st ICTP (1984) 1212-1219, Japan.

T. Asamura/, Technology of the Schedule-Free Rolling on A New-Type Hot Strip Mill, Proc. 1st ICTP (1984) 1220-1229, Japan.

S. Hattori/A. Mizuta/M. Kitayama/Y. Yamaguchi/, Effects of Roll Arrangements and Roll Sizes on Shape Controllability of Cluster Mills, Proc. 1st ICTP (1984) 1230-1235, Japan.

T. Kawanami/S. Omori/T. Fujiwara/M. Moriya/K. Ohya/H. Yamamoto/, Characteristics of Rolling in Asymmetric Cluster Mill, Proc. 1st ICTP (1984) 1236-1241, Japan.

M. Okado/T. Ariizumi/I. Nakauchi/H. Takei/, A New Width Enlargement Concept of Slabs in Hot Strip Mills, Proc. 1st ICTP (1984) 1242-1247, Japan.

J. Kitazawa/A. Mizuta/I. Kokubo/, Rotating Behavior of Slab on its Longitudinal Axis during Edge Rolling, Proc. 1st ICTP (1984) 1248-1253, Japan.

C. Hayashi/T. Yamada/, Theory of Plasticity on Seamless Tube Rolling and its Application to Field Operation, Proc. 1st ICTP (1984) 1254-1265, Japan.

S. Yoshiwara/T. Kawanami/, Effect of Reduction Ratio on the Properties of Seamless Pipe, Proc. 1st ICTP (1984) 1266-1273, Japan.

W. Dobrucki/ J. Mischke/A. Pietrzykowski/, New DM Planetary Tube Cold Rolling Mill - Experiments and Results, Proc. 1st ICTP (1984) 1274-1278, Poland.

T. Tsuta/K. Kadota/T. Nishio/T. Noma/S. Ideriha/S. Karashige/H. Hino/H. Ono/M. Makimura/, Development of the Three-Roll Planetary Mill - Experiments and Analytical Studies of Rolling Process -, Proc. 1st ICTP (1984) 1279-1286, Japan.

T.Z. Blazynski/R.S. Lee/, Tool Design and Rectification of Inhomogeneity of Flow in Rotary Tube Elongation - A model Material Study, Proc. 1st ICTP (1984) 1287-1291, UK.

J.S. Ryoo/D.Y. Yang/W. Johnson/, Lower Upper-Bound Analysis of the Ring-Rolling Process by Using Force Polygon Diagram and Dual Velocity Field, Proc. 1st ICTP (1984) 1292-1298, Korea.

T. Shinokura/K. Takai/H. Meguro/, A New Method for Predicting Speed in Bar Rolling, Proc. 1st ICTP (1984) 1299-1304, Japan.

Y. Takahashi/M. Moriga/Y. Yamaguchi/A. Kitamura/M. Moritaka/, Mathematical Models for Mill Set-up System in Rod Rolling, Proc. 1st ICTP (1984) 1305-1310, Japan.

M.J. Grimble/M.A. Johnson/, Dynamic Simulation and Control of Strip Rolling Mills, Proc. 1st ICTP (1984) 1311-1321, UK.

J.S. Yun/H.S. Cho/, Optimal Control System Design for Ring Rolling Processes, Proc. 1st ICTP (1984) 1322-1327, Korea.

A. Ogasawara/T. Matsubara/, Hot Steel Strip Shape Meter, Proc. 1st ICTP (1984) 1328-1333, Japan.

N. Mutoh/T. Nosetani/T. BaBa/Y. Takeda/Y. Itoh/, Application of Eddy Current Type Shapemeter to Tandem Cold Mill of Aluminum Strip, Proc. 1st ICTP (1984) 1334-1339, Japan.

T. Ohi/K. Kondo/T. Kono/T. Nishino/M. Mukoukubo/, New Computer Control System Renovated for Kashima's Fully-Continuous Tandem Cold Mill, Proc. 1st ICTP (1984) 1340-1345, Japan.

A. Kitamura/Y. Kishimoto/ M. Konishi/T. Morita/T. Nakata/I. Takahashi/, Hydraulic Screw-Down AGC System for Plate Rolling Mill, Proc. 1st ICTP (1984) 1346-1351, Japan.

A. Sugie/H. Kimura/T. Yamaguchi/T. Okamoto/, Crown Control of Aluminum Strip in Hot Rolling, Proc. 1st ICTP (1984) 1352-1359, Japan.

H. Sumi/R. Takahashi/T. Yokoi/Y. Misaka/, A Numerical Model and Control of Plate Crown in the Hot Strip or Plate Rolling, Proc. 1st ICTP (1984) 1360-1365, Japan.

S. Onda/A. Adachi/K. Toyoshima/M. Kitahama/I. Yarita/T. Sasaki/, Profile Control of Hot Rolled Steel Strip by Shifting Work Roll with Tapered Crown, Proc. 1st ICTP (1984) 1366-1371, Japan.

H. Matsumoto/S. Hatae/H. Tsukamoto/H. Hino/, Development of a Pair Cross Mill for Crown Control of Hot Strips, Proc. 1st ICTP (1984) 1372-1377, Japan.

T. Masui/T. Nagai/J. Yamada/T. Nishino/, Current Applications of Sumitomo Variable Crown Roll System to Various Type of Strip Mills, Proc. 1st ICTP (1984) 1378-1383, Japan.