Committees

Standing Advisory Board (SAB/ICTP)

Chairman
M. Kiuchi, University of Tokyo, Japan

Secretary
K. Mori, Toyohashi University of Technology, Japan

Members
J. Allwood, University of Cambridge, UK
P. Bariani, University of Padova, Italy
Y. Chastel, Renault, France
J.-L. Chenot, MINES ParisTech, France
M. Geiger, University Erlangen-Nurnberg, Germany
G. Hirt, RWTH Aachen, Germany
T. Ishikawa, Nagoya University, Japan
C.G. Kang, Pusan National University, Korea
A. Kocanda, Warsaw University of Technology, Poland
R. Kopp, RWTH Aachen, Germany
G. Lahoti, Timken Company, USA
P.A.F. Martins, University of Lisbon, Portugal
K. Osakada, Osaka University, Japan
R. Shivpuri, Ohio State University, USA
A.E. Tekkaya, TU Dortmund, Germany
M. Tisza, University of Miskolc, Hungary
J. Yanagimoto, University of Tokyo, Japan
D.-Y. Yang, KAIST, Korea
S.J. Yuan, Harbin Institute of Technology, China

ICTP 2014 Chairmen

T. Ishikawa, Nagoya University, Japan
K. Mori, Toyohashi University of Technology, Japan

---

International Scientific Committee

K. Agarwal, Minnesota State University, USA
T. Aizawa, Shibaura Institute of Technology, Japan
O. Allix, LMT Cachan, France
J.M. Allwood, University of Cambridge, UK
T. Altan, Ohio State University, USA
M. Arentoft, Technical University of Technology, Denmark
A.F.M. Arif, KFUPM, Saudi Arabia
B. Awiszus, TU Chemnitz, Germany
A. Azushima, Yokohana National University, Japan
M. Bakhshi-Jooybari, Babol Noshirvani University of Technology, Iran
T. Balan, Arts et Metiers ParisTech, France
D. Banabic, Technical University of ClujNapoca, Romania
P.F. Bariani, University of Padova, Italy
F. Barlat, Pohang University of Science & Technology, Korea
F. Bay, MINES ParisTech, France
N. Bay, Technical University of Technology, Denmark
B.-A. Behrens, University Hannover, Germany
Y. Beygelzimer, Donetsk Physics & Engineering Institute of the National Academy of Sciences of Ukraine, Ukraine
R. Bigot, Arts et Metiers ParisTech, France
P.O. Bouchard, MINES ParisTech, France
J. Brooks, University of Strathclyde, UK
A. Brosius, TU Dresden, Germany
S. Bruschi, University of Padova, Italy
B. Buchmayr, University of Loeben, Austria
S. Button, State University of Campinas, Brazil
J. Cao, Northwestern University USA
O. Cazacu, University of Florida, USA
E. Ceretti, University of Brescia, Italy
J.M.A. Cesar de Sa, University of Porto, Portugal
Y.W. Chang, Pohang University of Science & Technology, Korea
Y. Chastel, Renault, France
J.-L. Chenot, MINES ParisTech, France
F. Chinesta, Ecole Centrale de Nantes, France
A. Combescure, Insa Lyon, France
L. Cser, Corvinus University of Budapest, Hungary
E. Cueto, University of Zaragoza, Spain
G. Daehn, Ohio State University, USA P.P. Date, Indian Institute of Technology, India
T.A. Dean, University of Birmingham, UK
J. Duflou, K.U. Leuven, Belgium
B. Engel, Universitet Siegen, Germany
L. Filice, University of Calabria, Italy
L. Fratini, University of Palermo, Italy
M. Geiger, University Erlangen-Nurnberg, Germany
J.-C. Gelin, University of Franche-Comte, France
A. Ghiotti, University of Padova, Italy
J. Gracio, University of Aveiro, Portugal
P. Groche, Darmstadt University, Germany
A.M. Habraken, University of Liege, Belgium
G. Hirt, RWTH Aachen, Germany
P. Hodgson, Deakin University, Australia
H. Hoffmann, Technical University of Munchen, Germany
W. Homberg, University of Paderborn, Germany
O.S. Hopperstad, Norwegian University of Science and Technology, Norway
P. Hora, ETH Zurich, Switzerland
M. Hoshino, Nihon University, Japan
H.J. Huetink, University of Twente, Netherlands
H. Huh, KAIST, Korea
Y.-M. Hwang, National Sun Yat-sen University, Taiwan
Y.-T. Im, KAIST, Korea
T. Ishikawa, Nagoya University, Japan
J. Jeswiet, Queen's University, Canada
Z. Jiang, University of Wollongong, Australia
B. Kaftanoglu, Atlim University, Turkey
N. Kanetake, Nagoya Universit, Japan
B.S. Kang, Pusan National University, Korea
C.G. Kang, Pusan National University, Korea
K. Kawai, Yokohana National University, Japan
R. Kawalla, TU Berakademie Freiberg, Germany
Y.T. Keum, Hanyang University, Korea
M.K. Khraishen, Masdar Institute of Science and Technology, UAE
B.-M. Kim, Pusan National University, Korea
H.J. Kim. Kangwon National University, Korea
H.S. Kim, Pohang University of Science & Technology, Korea
H.-Y. Kim, Kangwon National University, Korea
Y.H. Kim, Chungnam National University, Korea
B.L. Kinsey, University of New Hampshire, USA
K. Kitamura, Nagoya Institute of Technology, Japan
M. Kiuchi, University of Tokyo, Japan
M. Kleiner, TU Dortmund, Germany
F. Klocke, RWTH Aachen, Germany
A. Kocanda, Warsaw University of Technology, Poland
R. Kolleck, University of Technology Graz, Austria
K. Kondoh, Osaka University, Japan
R. Kopp, RWTH Aachen, Germany
A. Korhonen, Helsinki University of Technology, Finland
G. Krallics, Technological University of Budapest, Hungary
T. Kuwabara, Tokyo University of Agriculture and Technology, Japan
K. Kuzman, University of Ljubljana, Slowenia
J.H. Lee, Korea Institude of Meterials Science, Korea
Y.S. Lee, Kookmin University, Korea
Y.S. Lee, Korea Institude of Meterials Science, Korea
J.J. Li, Huazhong University of Science and Technolog, China
M. Liewald, Stuttgart University, Germany
J. Lin, Imperial College, UK
H. Long, University of Sheffield, UK
X. Lu, Beijing Institute of Electrical and Mechnical Engineering, China
K. Manabe, Tokyo Metropolitan University, Japan
P.A.F. Martins, University of Lisbon, Portugal
E. Massoni, MINES ParisTech, France
R. Matsumoto, Osaka University, Japan
K. Mattiasson, Chalmers University of Technology, Sweden
M. Merklein, University Erlangen-Nurnberg, Germany
F. Micari, University of Palermo, Italy
W.Z. Misiolek, Lehigh University, USA
H. Miura, Kyushu University, Japan
P. Montmitonnet, MINES ParisTech, France
Y.H. Moon, Pusan National University, Korea
K. Mori, Toyohashi University of Technology, Japan
O. Music, Atilim University, Turkey
T. Neitzert, AUT University, New Zealand
R. Neugebauer, Fraunhofer IWU, Germany
G. Ngaile, North Carolina State University, USA
N. Ohtake, Tokyo Institute of Technology, Japan
M. Otsu, Fukui University, Japan
F. Ozturk, The Petroleum Institute, UAE
H. Palkowski, Clausthal University of Technology, Germany
P. Pauskar, The Timken Company, USA
A.M. Pesin, Magnitogorsk State Technical University, Russia
M. Pietrzyk, AGH University, Poland
M. Plancak, University of Novi Sad, Serbia
J.-P. Ponthot, University of Liege, Belgium
V. Premanond, King Mongkut's University of Technology, Thailand
A. Rosochowski, University of Strathclyde, UK
K. Saanouni, University of Technology of Troyes, France
L. Schaeffer, Federal University of Rio Grande do Sul, Brazil
K. Steinhoff, University of Kassel, Germany
S. Takahashi, Nihon University, Japan
H. Takuda, Kyoto University, Japan
S. Tanaka, Shizuoka University, Japan
A.E. Tekkaya, TU Dortmund, Germany
M. Tisza, University of Miskolc, Hungary
H. Utsunomiya, Osaka University, Japan
A.H. van den Boogaard, University of Twente, Netherlands
V.C. Venkatesh, University of Nevada-Las Vegas, USA
F. Vollertsen, BIAS GmbH, Germany
R. Wagoner, Ohio State University, USA
Z.G. Wang, Gifu University, Japan
J.-X. Xie, Beijing University of Science and Technology, China
J. Yanagimoto, University of Tokyo, Japan
D.-Y. Yang, KAIST, Korea
H. Yang, Northwestern Polytech University, China
M. Yang, Tokyo Metropolitan University, Japan
J.-W. Yoon, Swinburne University of Technology, Australia
F. Yoshida, Hiroshima University, Japan
K. Yoshida, Tokai University, Japan
M. Yoshino, Tokyo Institute of Technology, Japan
S.J. Yuan, Harbin Institute of Technology, China
K. Zhang, Harbin Institute of Technology, China
S.H. Zhang, Institute of Metal Research, CAS, China
G.Q. Zhao, Shangdong University, China
Z. Zhao, Shanghai Jiaotong University, China
P. Zheng, Tsinghua University, China

---

Local Organizing Committee

E. Abe, Nagoya University, Japan
Y. Abe, Toyohashi University of Technology, Japan
M. Abo, Sumitomo Light Metal Industries, Japan
K. Hayakawa, Shizuoka University, Japan
S. Hiwatashi, Nippon Steel & Sumitomo Metal Corporation, Japan
T. Iguchi, JFE Steel Corporation, Japan
T. Ishiguro, Nagoya University, Japan
S. Ishihara, Aichi Steel Corporation, Japan
S. Isogawa, Daido University, Japan
N. Iwata, Toyota Central R&D Labs, Japan
N. Kanetake, Nagoya University, Japan
K. Kato, Gifu National College of Technology, Japan
K. Kawai, Yokohama National University, Japan
K. Kitamura, Nagoya Institute of Technology, Japan
K. Komori, Daido University, Japan
T. Kuboki, University of Electro-Communications, Japan
T. Maeno, Toyohashi University of Technology, Japan
S. Maki, Mie University, Japan
H. Morishita, Toyota Motor Corporation, Japan
K. Nakamura, Japan Society for Technology of Plasticity, Japan
H. Shoji, Nagoya Tokushuko Corporation, Japan
S. Sugiyama, Denso Corporation, Japan
K. Suzuki, Toyota Motor Corporation, Japan
S. Tanaka, Shizuoka University, Japan
M. Terano, Nagoya University, Japan
Z. Wang, Gifu University, Japan
T. Yamada, Mitsubishi Heavy industries, Japan
H. Yokoo, Toyota Motor Corporation, Japan
H. Yoshida, Daido Steel Corporation, Japan
Y. Yoshida, Gifu University, Japan
N. Yukawa, Nagoya University, Japan

---

ICTP 2014 Home Page